Komax’s patented 20-micron porous gas injector creates micro-size ozone bubbles which offer unmatched gas-liquid contact. When millions of gas bubbles are created and then uniformly dispersed throughout the process flow, the result is a highly homogenous ozone-contacted liquid. Our estimates have revealed that the ozone motionless mixers offer 2200% improved ozone contacting!
Candler Water Filter Plant in Dekalb County, Georgia to state a few examples.
Since 1973 Komax Systems, Inc. has led the industry in static mixing technology offering a diverse range of Static Mixers, Steam Heaters, Desuperheaters, and Heat Exchangers.
Reference: Komax Blog
Komax has gained world recognition across the many industries for the effectiveness of their line ofwater purification static mixers. These mixers are designed to effectively carry out disinfection of water through chlorination or mix chemical additives like alum.
Komax offers the range of mixers from less than an inch in diameter to large scale channel static mixers that can work in has made them very popular. These larger mixers are designedto be installed in water treatment channels of any cross section including open and closed channels. They are capable of delivering a mixing performance that is better than 98%.
For applications where low head requirements are necessary, Komax can design low-pressure drop designs. These can either be supplied as complete assemblies or in component form for on-site assembly (suitable for plants where access is difficult). We understand that on-site assembly for large scale water purification static mixers can be an intimidating task. But our mixers are an exception. For instance, a typical unit of this type in a ten foot by ten-foot duct was assembled by the owner in less than eight man hours.
Our customers have been using our units for years without any maintenance problems because we have eliminated the use of moving parts. Our valued customers have also appreciated the fact that our water purification static mixers generate no noise leading a better work environment. Please contact us at www.komax.com and our engineers are prepared to design the most viable motionless mixer system for your application.
Reference:Komax Blog
Our line of Hi-Pass™ Sludge Mixers is designed to effectively mix polymer solution into sludge flows prior to the dewatering process. With this, you can enjoy up to 25% or more polymer savings. Once installed, these units will help you reduce chemical consumption and costs, Komax’s sludge static mixers produce dryer cake solids in dewatering operations.
Komax’s sludge static mixers are best known for their non-fouling and non-clogging track record. We have achieved this by designing smoothly contoured edges of the element sets, with a large radius. We have eliminated corners where solids or fibrous materials usually tend to get accumulated. This line of mixers is designed to ensure better dispersion of a small amount of solution through the sludge mixing elements.
Our units are engineered to follow a unique mixing action. Each mixing element set in combination sweeps approximately two thirds of the circumference of the pipe and directs the flow to the opposite side. This provides a very strong wall-to-wall radial transfer. You can achieve great results even when downstream free flow lengths are absent in the mixing process.
These sludge static mixers are best used on the feed line to devices such as belt filter presses, plate filter presses, gravity belt thickeners, centrifuges and pressure or vacuum filters. For more information, please visit www.komax.com.
Reference:Komax Blog
• No moving parts
• Low pressure drop
• Short installation length
• High range ability
Reference:Komax Blog
The food and beverage industry requires only the most hygienic processing equipment. Moreover, consistency in taste and texture is a prerequisite. Recognizing this need, we at Komax Inc developed a range of inline static mixers to cater to the most complex processes while giving perfect blending solutions.
Our motionless mixers have proven to be an efficient option for the following processes:
*Blending solid and semi-solid materials such as margarine and butter, as also mixing tomato ketchup and other sauces and dips.
*Getting viscous liquids materials like jams and syrups to a healthy consistency.
*Effectively mixing light liquids such as soft drinks and other read-to-package drinks.
Komax inline static mixers have the ability to convert a single or multiple input stream into a homogeneously mixed product. Keeping in mind the hygiene aspect, our static mixers do not comprise moving parts and this is what makes them easy to remove and clean. Right from the fittings to the metal we use, everything is of top-notch quality ensuring that our mixers are adherent to the highest food safety standards. Our static mixers are made from 316 stainless steel and housed in 316 stainless steel sanitary tubing.
Should you need any more details about inline static mixers or any other Komax products, please visit us at www.komax.com and we shall be glad to assist you.
Reference:Komax Blog
• Sludge static mixers
• Ozone/Water Static mixers
• Large Diameter pipeline static mixers
• Channel Mixers
• Non-fouling motionless mixers (Hi-Pass) that are suited for sludges and slurries. These mixing elements will not plug or foul.
• Equalizer technology which offers the highest levels of mixing in liquid/gas applications and steam heaters and desuperheaters.
Komax mixers can be custom engineered to provide low pressure configurations and component style systems that can be installed on sites where access is limited.About Komax
Komax is the leader in static mixing technology.Komax offers a diverse range of Static Mixers (motionless mixers), Steam Heaters, Desuperheaters and Heat Exchangers.Our motionless mixers can be used in mixing and heating applications that involve liquids, gases, slurries, sludge and particulates under laminar as well as turbulent flow conditions. Our chemical mixers and water static mixers ensure enhanced mixing and lower pressure drops.
With more than three hundred combined years of fluids-mixing experience, the Komax design team has applied Komax technology to a technical base of over one hundred thousand installations across the world.
Reference:Komax Blog
Since 1973, Komax has been the leader in Static Mixing Technology. Komax mixers offer the highest levels of mixing, and are very competitively priced.
Our corrosion resistant Teflon staticmixers provide an excellent solution for severe service acid mixing applications. These Teflon Static mixers are used for mixing concentrated acid or other strong chemicals, where aggressive chemicals and high temperatures would overcome other mixers.
Our standard Teflon static mixers are available in standard 2″-10″ diameter sizes. Larger sizes are available on by special order. The mixers are available with both—schedule 40 carbon steel as well as 316L SS housings. Teflon mixing elements are 25% glass filled for added endurance. Our Teflon static mixers scan be ordered within jection ports.
Komax Teflon inline static mixers are a product that offers extreme resistance to chemical corrosion with the high performance of our triple action motionless mixer.
With more than three hundred combined years of fluids-mixing experience, the Komax Design Team has applied Komax technology to a wide range of applications. Komax has installed over one hundred thousand static mixers across the world.
Reference:Komax Blog
Carbon steel static mixers are the workhorse of static mixers. This low cost and versatile material is preferred for many industrial and petrochemical applications.
Carbon Steel Static Mixers are available in many types of steel depending upon your requirements.
These include:
A105 for normal applications
A106 for high temperature service
A350 for very cold applications including LNG
Komax can offer mixers in both welded and seamless carbon steel piping. Komax carbon steel mixers are available in all standard pipe thickness from schedule 10 thru XXS and all flange ratings and styles. Komax offers mixers with API 5L/ISO 3183 grades of pipe.
Komax offers static mixers constructed from carbon steel in many sizes ranging from ½” dia.thru 98”dia. Sizes.
Carbon steel mixers are offered with many different coating options coatings including:
Epoxy fusion coating
Variety of paint and primer systems
Bituminous Asphalt
Abrasion resistant cladding
Teflon Coating
If you have a requirement for a carbon steel static mixer, contact Komax www.komax.com and ask to speak to a technical expert who can provide the optimum solution for your application.
Reference: Komax Blog
Chemical static mixers are integral to any industry sector whose requirements include wastewater treatment and chemical processing. Apart from that, these are also used in mixing two component adhesives and sealants as well as in the refinery and oil & gas market. Hence, they have emerged as the most important devices in a wide range of application areas spanning across diverse industry segments.
The Komax Edge
We at Komax System Inc. understand the significance of these devices, and our R&D team has frequently worked towards designing of superior quality chemical static mixers and other related products. Apart from standard catalogue products, you would also find customized options in our company for your specialized function/s. You can use them in applications that range from liquids, gases, slurries to particulates in both laminar and turbulent flow conditions. Our patented triple action mixing design that includes two-by-two division, cross-current mixing, and back mixing counter rotating vortices are in huge demand across America.One of our clients which has benefitted extensively from our Inline Mixers Waste Water treatment for chlorine mixing reaffirms our position as the world leader in static mixing technology.Hence, be it Fiberglass Static Mixers, or other related devices, Komax System Inc. is indeed your one stop source.
Reference :Komax Blog
